乘用车DCT车型的动力性提升分析与实施

为满足公司的发展战略要求,需要打造一款高性能、运动操控性车型,为提升该款乘用车DCT车型的动力性和操控型,分别从车辆的起步、加速过程的扭矩发挥和换挡结束的扭矩恢复、换挡过程的扭矩交替时间和转速同步时间、换挡线加速度和动力升挡换挡线及硬件五个方面进行优化。论文对该车型的起步加速过程以及换挡过程的扭矩控制进行详细分析,并将五个优化方向分解为13个子项,分别对各子项优化效果进行分析,通过INCA软件对车辆的控制系统进行优化,经过实际道路测试满足了目标开发要求。     

A coupled numerical approach to simulate the effect of earthquake frequency content on seismic behavior of submarine tunnel

Roughly 90% of all natural vibrations have epicenters in offshore zones and may cause destruction of submarine and floating structures. Such excitations can influence the safe performance of facilities set up on the seabed, like tunnels, jacket legs and subsea oil pipelines. Some researches on this theme have been carried out to demonstrate the importance of seaquake analyses and their effects have been underlined. The present study intends to numerically simulate a two-dimensional fluid-structure interaction (FSI) problem in order to examine the dynamic response of submarine tunnel under real horizontal earthquakes. Pressure is considered as independent nodal variables to represent the fluid flow effects and the induced time-dependent acceleration in porous medium equation is incorporated in the analysis and the tunnel shell is considered as flexible. This work highlights the importance of the input ground motion frequency content that governs the development of the induced seismic stress/strain around the lining of the tunnel. The results demonstrate that for deep sea the increment rate of the circumferential stress caused by surface gravity waves is below 7% when compared to the no-wave interface condition. Moreover, it is confirmed that long-period record may amplify the overall response of the system (up to 60%) specially the lateral and vertical displacements, as well as the principal stress to a lesser extent. The developed numerical model can attend to further analysis of tunnels embedded in a half-space in conjunction with fluid undergoing the severe long-period earthquakes.     

PHEV能量管理策略研究

针对一款串联型插电式混合动力公交车,文章基于MTLALB建立整车和各部件数值模型。在中国典型城市公交工况下,建立基于全局优化的DP策略,并与CD-CS策略和PMP策略进行能耗对比分析。结果表明:(1)基于CD-CS策略的后期SOC在一定范围内波动,DP策略与PMP策略的SOC轨迹近似呈线性变化。(2)CD-CS策略较DP策略的能耗成本高22.68%,PMP策略比DP策略的能耗成本高0.30%。DP策略与PMP策略可以合理分配能量源,实现全局最优,但DP策略相比PMP策略计算量大。     

A signal decomposition method based on repeated extraction of maximum energy component for offshore structures

Contrary to most signal decomposition methods that usually decompose an original signal into a series of components simultaneously, a novel approach based on repeated extraction of Maximum Energy Component (MEC) is proposed. The approach starts from determination of the MEC referring to the estimated Power Spectral Density (PSD) function, and then represents the MEC by employing an exponential function to fit the original signal. By defining a stopping criterion based on two adjacent estimated PSDs, each MEC can be accurately extracted with an improved performance throughout the entire signal decomposition. To verify the proposed method, a single degree-of-freedom system subject to harmonic loads has been examined. Numerical results show that the analytical response can not only be decomposed into four MECs corresponding to the excitation and the system, respectively, but also provide an accurate estimation of natural frequency and damping ratio of the system. Meanwhile, by observing results from the Ensemble Empirical Mode Decomposition (EEMD), Variational Mode Decomposition (VMD) and Prony based on state-space model (Prony-SS), an improved decomposition accuracy has been achieved from the proposed approach. Furthermore, experimental data from the Norwegian Deepwater Programme and two sets of field-test data from one fixed offshore platform and an offshore wind turbine have been used to demonstrate the correctness of the developed signal decomposition method. It is noted that divergence in results by Prony-SS can be observed when a very large model order is used, while the proposed method provides the better decomposition and reconstruction of signals.     

米勒循环结合可变涡轮增压优化柴油机性能的仿真与试验研究

在开发一款机车柴油机过程中,利用AVL BOOST软件对柴油机工作过程进行了仿真计算,计算了不同米勒强度和不同喷油正时条件下柴油机的性能参数。根据计算结果,排除了弱米勒的方案。针对强米勒和中米勒,开展了试验研究,通过调整喷油定时、增压压力设定、共轨喷射压力,进行了多方案试验研究,试验结果表明,强米勒方案虽然可以有效降低Nox排放,但是带来PM排放升高和涡轮前排气温度升高的问题,中米勒虽然降低Nox排放的效果弱于强米勒,但是能获得比较满意的PM排放,且涡轮前排气温度远低于强米勒,综合各方面性能参数的比较结果,在满足排放要求的前提下,中米勒为优选方案。     

基于STAR-CCM+的螺旋桨水动力性能分析

文章运用公式将P4119螺旋桨二维坐标型值转换成三维坐标型值,导入Gambit2. 4软件建立几何模型。基于STAR-CCM+软件对该桨进行网格划分,设置边界条件和数值,仿真模拟不同进速系数下的转矩系数、推力系数、敞水效率和桨叶表面压力分布。经与试验值比较,误差均在10%以内,验证了计算结果的准确性,能够满足工程需要。     

福塔纤维沥青混凝土性能研究

福塔纤维（FORTA AR）是一种新型的聚合物有机纤维，它由聚丙烯（Pnlypropylene）和芳纶（Keylar）按照质量比3：1混合而成。对掺加0．045％福塔纤维、0．3％的德兰尼特纤维（Dolanit）以及不加纤维的沥青混合料的高温稳定性、低温抗裂性、以及水稳定性等路用性能进行了研究，结果表明福塔纤维沥青混合料具有优良的路用性能；继而对福塔纤维改善沥青混合料路用性能的机理进行了分析。     

汽车动力总成弯曲振动应力响应及其激励灵敏度分析

本文利用文献（５）建立的汽车动力总成弯曲有限元分析模型，计算分析离合器壳的动应力响应，并考察了动应力关于不平衡质量位置的灵敏度，对计算分析进行了实验验证。     

基于结构疲劳动态可靠性分析的船舶结构概率损伤容限设计

本文根据结构可靠性理论，提出了一种基于结构疲劳动态可靠性分析的损伤容限分析方法，给出结构疲劳裂纹随机扩展过程中疲劳寿命分布和结构疲劳可靠性的表达式。在给定与疲劳寿命有关的各参数条件下求得动态可靠性曲线，从而在结构设计中根据可靠性要求确定或选择设计参数。     

机车车辆动力学研究及发展

机车车辆动力学在最近10年得到迅速发展,考虑车辆—轨道耦合作用的耦合模型得到广泛应用。随着大跨距跨江铁路桥的建设,车和桥的耦合振动会引起接触网的振动,进而影响弓网的耦合振动。因此十分有必要开展接触网—受电弓—机车车辆—线路—桥梁耦合大系统动力学的研究。进行机车车辆动力学性能优化,必须首先确定机车车辆动力学三要素的优先关系,即运行的稳定性—安全性—平稳性,建立以列车为研究对象的模型,同时在模型中考虑机车车辆结构弹性和频变特征悬挂参数以及气流扰动的影响,进而进行灵敏度分析和参数优化。给出考虑频变特性的钢弹簧等效计算方法以及基于循环变量的列车系统动力学建模和计算方法,并验证了计算方法的有效性。